Crew

Main article: Crew of the RMS Titanic

Titanic had around 885 crew members on board for her maiden voyage.^[95] Like other vessels of her time, she did not have a permanent crew, and the vast majority of crew members were casual workers who only came aboard the ship a few hours before she sailed from Southampton.^[96] The process of signing up recruits had begun on 23 March and some had been sent to Belfast, where they served as a skeleton crew during Titanic's sea trials and passage to England at the start of April.^[97]
Captain Edward John Smith, the most senior of the White Star Line's captains, was transferred from Olympic to take command of Titanic.^[98] Henry Tingle Wilde also came across from Olympic to take the post of Chief Mate. Titanic's previously designated Chief Mate and First Officer, William McMaster Murdoch and Charles Lightoller, were bumped down to the ranks of First and Second Officer respectively. The original Second Officer, David Blair, was dropped altogether.^[99][g] The Third Officer was Herbert Pitman MBE, the only deck officer who was not a member of the Royal Naval Reserve. Pitman was the second to last surviving officer.
Titanic's crew were divided into three principal departments: Deck, with 66 crew; Engine, with 325; and Victualling (pronounced vi-tal-ling), with 494.^[100] The vast majority of the crew were thus not seamen, but were either engineers, firemen, or stokers, responsible for looking after the engines, or stewards and galley staff, responsible for the passengers.^[101] Of these, over 97% were male; just 23 of the crew were female, mainly stewardesses.^[102] The rest represented a great variety of professions—bakers, chefs, butchers, fishmongers, dishwashers, stewards, gymnasium instructors, laundrymen, waiters, bed-makers, cleaners, and even a printer,^[102] who produced a daily newspaper for passengers called the Atlantic Daily Bulletin with the latest news received by the ship's wireless operators.^[44][h]
Most of the crew signed on in Southampton on 6 April;^[15] in all, 699 of the crew came from there, and 40% were natives of the town.^[102] A few specialist staff were self-employed or were subcontractors. These included the five postal clerks, who worked for the Royal Mail and the United States Post Office Department, the staff of the First Class A La Carte Restaurant and the Café Parisien, the radio operators (who were employed by Marconi) and the eight musicians, who were employed by an agency and travelled as second-class passengers.^[104] Crew pay varied greatly, from Captain Smith's £105 a month (equivalent to £9,375 today) to the £3 10s (£313 today) that stewardesses earned. The lower-paid victualling staff could, however, supplement their wages substantially through tips from passengers.^[103]

Passengers

Main article: Passengers of the RMS Titanic

John Jacob Astor IV in 1909. He was the wealthiest person aboard Titanic.

Titanic's passengers numbered approximately 1,317 people: 324 in First Class, 284 in Second Class, and 709 in Third Class. Of these, 869 (66%) were male and 447 (34%) female. There were 107 children aboard, the largest number of which were in Third Class.^[105] The ship was considerably under capacity on her maiden voyage, as she could accommodate 2,453 passengers—833 First Class, 614 Second Class, and 1,006 Third Class.^[106]
Usually, a high prestige vessel like Titanic could expect to be fully booked on its maiden voyage. However, a national coal strike in the UK had caused considerable disruption to shipping schedules in the spring of 1912, causing many crossings to be cancelled. Many would-be passengers chose to postpone their travel plans until the strike was over. The strike had finished a few days before Titanic sailed; however, that was too late to have much of an effect. Titanic was able to sail on the scheduled date only because coal was transferred from other vessels which were tied up at Southampton, such as SS City of New York and RMS Oceanic, as well as coal Olympic had brought back from a previous voyage to New York, which had been stored at the White Star Dock.^[83]
Some of the most prominent people of the day booked a passage aboard Titanic, travelling in First Class. Among them were the American millionaire John Jacob Astor IV and his wife Madeleine Force Astor, industrialist Benjamin Guggenheim, Macy's owner Isidor Straus and his wife Ida, Denver millionairess Margaret "Molly" Brown,^[i] Sir Cosmo Duff Gordon and his wife, couturière Lucy (Lady Duff-Gordon), cricketer and businessman John Borland Thayer with his wife Marian and son Jack, the Countess of Rothes, author and socialite Helen Churchill Candee, journalist and social reformer William Thomas Stead, author Jacques Futrelle with his wife May, and silent film actress Dorothy Gibson, among others.^[107] Titanic's owner J. P. Morgan was scheduled to travel on the maiden voyage but cancelled at the last minute.^[108] Also aboard the ship were the White Star Line's managing director J. Bruce Ismay and Titanic's designer Thomas Andrews, who was on board to observe any problems and assess the general performance of the new ship.^[109]
The exact number of people aboard is not known, as not all of those who had booked tickets made it to the ship; about 50 people cancelled for various reasons,^[110] and not all of those who boarded stayed aboard for the entire journey.^[111] Fares varied depending on class and season. Third Class fares from London, Southampton, or Queenstown cost £7 5s (equivalent to £647 today) while the cheapest First Class fares cost £23 (£2,054 today).^[93] The most expensive First Class suites were to have cost up to £870 in high season (£77,682 today).^[106]

Maiden voyage

Both Olympic and Titanic registered Liverpool as their home port. The offices of the White Star Line as well as Cunard were in Liverpool, and up until the introduction of the Olympic, most British ocean liners for both Cunard and White Star, such as Lusitania and Mauretania, sailed out of Liverpool followed by a port of call in Queenstown, Ireland. Since the company's founding in 1871, a vast majority of their operations had taken place out of Liverpool. However, in 1907 White Star established another service out of the port of Southampton on England's south coast, which became known as White Star's "Express Service". Southampton had many advantages over Liverpool, the first being its closer proximity to London.^[90]
In addition, Southampton, being on the south coast, allowed ships to easily cross the English Channel and make a port of call on the northern coast of France, usually at Cherbourg. This allowed British ships to pick up clientele from continental Europe before recrossing the channel and picking up passengers at Queenstown. The Southampton-Cherbourg-New York run would become so popular that most British ocean liners began using the port after World War I. Out of respect for Liverpool, ships continued to be registered there until the early 1960s. Queen Elizabeth 2 was one of the first ships registered in Southampton when introduced into service by Cunard in 1969.^[90]
Titanic's maiden voyage was intended to be the first of many trans-Atlantic crossings between Southampton and New York via Cherbourg and Queenstown on westbound runs, returning via Plymouth in England while eastbound. Indeed, her entire schedule of voyages through to December 1912 still exists.^[91] When the route was established, four ships were assigned to the service. In addition to Teutonic and Majestic, the RMS Oceanic and the brand new RMS Adriatic sailed the route. When the Olympic entered service in June 1911, she replaced Teutonic, which after completing her last run on the service in late April was transferred to the Dominion Line's Canadian service. The following August, Adriatic was transferred to White Star's main Liverpool-New York service, and in November, Majestic was withdrawn from service impending the arrival of Titanic in the coming months, and was mothballed as a reserve ship.^[92][93]
White Star's initial plans for Olympic and Titanic on the Southampton run followed the same routine as their predecessors had done before them. Each would sail once every three weeks from Southampton and New York usually leaving at noon each Wednesday from Southampton and each Saturday from New York, thus enabling the White Star Line to offer weekly sailings in each direction. Special trains were scheduled from London and Paris to convey passengers to Southampton and Cherbourg respectively.^[93] The deep-water dock at Southampton, then known as the "White Star Dock", had been specially constructed to accommodate the new Olympic-class liners, and had opened in 1911.^[94]

Edward Smith, captain of Titanic, in 1911  Titanic at Southampton docks, prior to departure  Display ad for Titanic's first but never made sailing from New York on 20 April 1912

Crew

Sea trials

Titanic's sea trials began at 6 a.m. on Tuesday, 2 April 1912, just two days after her fitting out was finished and eight days before she was due to leave Southampton on her maiden voyage.^[84] The trials were delayed for a day due to bad weather, but by Monday morning it was clear and fair.^[85] Aboard were 78 stokers, greasers and firemen, and 41 members of crew. No domestic staff appear to have been aboard. Representatives of various companies travelled on Titanic's sea trials, Thomas Andrews and Edward Wilding of Harland and Wolff and Harold A. Sanderson of IMM. Bruce Ismay and Lord Pirrie were too ill to attend. Jack Phillips and Harold Bride served as radio operators, and performed fine-tuning of the Marconi equipment. Francis Carruthers, a surveyor from the Board of Trade, was also present to see that everything worked, and that the ship was fit to carry passengers.^[86]
The sea trials consisted of a number of tests of her handling characteristics, carried out first in Belfast Lough and then in the open waters of the Irish Sea. Over the course of about 12 hours, Titanic was driven at different speeds, her turning ability was tested and a "crash stop" was performed in which the engines were reversed full ahead to full astern, bringing her to a stop in 850 yd (777 m) or 3 minutes and 15 seconds.^[87] The ship covered a distance of about 80 nautical miles (92 mi; 150 km), averaging 18 knots (21 mph; 33 km/h) and reaching a maximum speed of just under 21 knots (24 mph; 39 km/h).^[88]
On returning to Belfast at about 7 p.m., the surveyor signed an "Agreement and Account of Voyages and Crew", valid for 12 months, which declared the ship seaworthy. An hour later, Titanic left Belfast again—as it turned out, for the last time—to head to Southampton, a voyage of about 570 nautical miles (660 mi; 1,060 km). After a journey lasting about 28 hours she arrived about midnight on 4 April and was towed to the port's Berth 44, ready for the arrival of her passengers and the remainder of her crew.^[89]

Building and preparing the ship

Construction, launch and fitting-out

Play media

Titanic Disaster - Genuine Footage (1911-1912)

The sheer size of Titanic and her sister ships posed a major engineering challenge for Harland and Wolff; no shipbuilder had ever before attempted to construct vessels this size. The ships were constructed on Queen's Island, now known as the Titanic Quarter, in Belfast Harbour. Harland and Wolff had to demolish three existing slipways and build two new ones, the largest ever constructed up to that time, to accommodate both ships.^[10] Their construction was facilitated by an enormous gantry built by Sir William Arrol & Co., a Scottish firm responsible for the building of the Forth Bridge and London's Tower Bridge. The Arrol Gantry stood 228 feet (69 m) high, was 270 feet (82 m) wide and 840 feet (260 m) long, and weighed more than 6,000 tons. It accommodated a number of mobile cranes. A separate floating crane, capable of lifting 200 tons, was brought in from Germany.^[67]
The construction of Olympic and Titanic took place virtually in parallel, with Olympic's keel laid down first on 16 December 1908 and Titanic's on 31 March 1909.^[15] Both ships took about 26 months to build and followed much the same construction process. They were designed essentially as an enormous floating box girder, with the keel acting as a backbone and the frames of the hull forming the ribs. At the base of the ships, a double bottom 5 feet 3 inches (1.60 m) deep supported 300 frames, each between 24 inches (61 cm) and 36 inches (91 cm) apart and measuring up to about 66 feet (20 m) long. They terminated at the bridge deck (B Deck) and were covered with steel plates which formed the outer skin of the ships.^[68]
The 2,000 hull plates were single pieces of rolled steel plate, mostly up to 6 feet (1.8 m) wide and 30 feet (9.1 m) long and weighing between 2.5 and 3 tons.^[69] Their thickness varied from 1 inch (2.5 cm) to 1.5 inches (3.8 cm).^[40] The plates were laid in a clinkered (overlapping) fashion from the keel to the bilge. Above that point they were laid in the "in and out" fashion, where strake plating was applied in bands (the "in strakes") with the gaps covered by the "out strakes", overlapping on the edges. Commercial oxy-fuel and electric arc welding methods, ubiquitous in fabrication today, were still in their infancy; like most other iron and steel structures of the era, the hull was held together with over three million iron and steel rivets, which by themselves weighed over 1,200 tons. They were fitted using hydraulic machines or were hammered in by hand.^[70] In the 1990s some material scientists concluded^[71] that the steel plate used for the ship was subject to being especially brittle when cold, and that this brittleness exacerbated the impact damage and hastened the sinking. It is believed that, by the standards of the time, the steel plate's quality was good, not faulty, but that it was inferior to what would be used for shipbuilding purposes in later decades, owing to advances in the metallurgy of steelmaking.^[71] As for the rivets, considerable emphasis has also been placed on their quality and strength.^{[72][73][74][75][76]}
One of the last items to be fitted on Titanic before the ship's launch was her two side anchors and one centre anchor. The anchors themselves were a challenge to make with the centre anchor being the largest ever forged by hand and weighing nearly 16 tons. Twenty Clydesdale draught horses were needed to haul the centre anchor by wagon from the Noah Hingley & Sons Ltd forge shop in Netherton, near Dudley, United Kingdom to the Dudley railway station two miles away. From there it was shipped by rail to Fleetwood in Lancashire before being loaded aboard a ship and sent to Belfast.^[77]
The work of constructing the ships was difficult and dangerous. For the 15,000 men who worked at Harland and Wolff at the time,^[78] safety precautions were rudimentary at best; a lot of the work was dangerous and was carried out without any safety equipment like hard hats or hand guards on machinery. As a result, deaths and injuries were to be expected. During Titanic's construction, 246 injuries were recorded, 28 of them "severe", such as arms severed by machines or legs crushed under falling pieces of steel. Six people died on the ship herself while she was being constructed and fitted out, and another two died in the shipyard workshops and sheds.^[79] Just before the launch a worker was killed when a piece of wood fell on him.^[80]
Titanic was launched at 12:15 p.m. on 31 May 1911 in the presence of Lord Pirrie, J. Pierpoint Morgan, J. Bruce Ismay and 100,000 onlookers.^[81] 22 tons of soap and tallow were spread on the slipway to lubricate the ship's passage into the River Lagan.^[80] In keeping with the White Star Line's traditional policy, the ship was not formally named or christened with champagne.^[81] The ship was towed to a fitting-out berth where, over the course of the next year, her engines, funnels and superstructure were installed and her interior was fitted out.^[82]
Although Titanic was virtually identical to the class's lead ship Olympic, a few changes were made to distinguish both ships. The most noticeable of these was that Titanic (and the third vessel in class Britannic) had a steel screen with sliding windows installed along the forward half of the A Deck promenade. This was installed as a last minute change at the personal request of Bruce Ismay, and was intended to provide additional shelter to first class passengers.^[83] These changes made Titanic slightly heavier than her sister, and thus she could claim to be the largest ship afloat. The work took longer than expected due to design changes requested by Ismay and a temporary pause in work occasioned by the need to repair Olympic, which had been in a collision in September 1911. Had Titanic been finished earlier, she might well have missed her collision with an iceberg.^[80]

Mail and cargo

Although Titanic was primarily a passenger liner, she also carried a substantial amount of cargo. Her designation as a Royal Mail Ship (RMS) indicated that she carried mail under contract with the Royal Mail (and also for the United States Post Office Department). For the storage of letters, parcels and specie (bullion, coins and other valuables) 26,800 cubic feet (760 m³) of space in her holds was allocated. The Sea Post Office on G Deck was manned by five postal clerks; three Americans and two Britons, who worked 13 hours a day, seven days a week sorting up to 60,000 items daily.^[58]
The ship's passengers brought with them a huge amount of baggage; another 19,455 cubic feet (550.9 m³) was taken up by first- and second-class baggage. In addition, there was a considerable quantity of regular cargo, ranging from furniture to foodstuffs and even motor cars.^[58] Despite later myths, the cargo on Titanic's maiden voyage was fairly mundane; there was no gold, exotic minerals or diamonds, and one of the more famous items lost in the shipwreck, a jewelled copy of the Rubaiyat of Omar Khayyam, was valued at only £405 (£36,162 today).^[59] According to the claims for compensation filed with Commissioner Gilchrist, following the conclusion of the Senate Inquiry, the single most highly valued item of luggage or cargo was a large neoclassical oil painting entitled La Circassienne au Bain by French artist Merry-Joseph Blondel. The painting's owner, first class passenger Mauritz Håkan Björnström-Steffansson, filed a claim for $100,000 ($2.4 million equivalent in 2014) in compensation for the loss of the artwork.^[57]
Titanic was equipped with eight electric cranes, four electric winches and three steam winches to lift cargo and baggage in and out of the hold. It is estimated that the ship used some 415 tons of coal whilst in Southampton, simply generating steam to operate the cargo winches and provide heat and light.^[60]

Lifeboats

Main article: Lifeboats of the RMS Titanic

A collapsible lifeboat with canvas sides

Titanic carried a total of 20 lifeboats: 14 standard wooden Harland and Wolff lifeboats with a capacity of 65 people each and four Englehardt "collapsible" (wooden bottom, collapsible canvas sides) lifeboats (identified as A to D) with a capacity of 47 people each. In addition, she had two emergency cutters with a capacity of 40 people each.^[61][e] Olympic herself did not even carry the four collapsibles A–D during the 1911–12 season. All of the lifeboats were stowed securely on the boat deck and, except for collapsible lifeboats A and B, connected to davits by ropes. Those on the starboard side were odd-numbered 1–15 from bow to stern, while those on the port side were even-numbered 2–16 from bow to stern.^[62]
Both cutters were kept swung out, hanging from the davits, ready for immediate use, while collapsible lifeboats C and D were stowed on the boat deck (connected to davits) immediately inboard of boats 1 and 2 respectively. A and B were stored on the roof of the officers' quarters, on either side of number 1 funnel. There were no davits to lower them and their weight would make them difficult to launch by hand.^[62] Each boat carried (among other things) food, water, blankets, and a spare life belt. Lifeline ropes on the boats' sides enabled them to save additional people from the water if necessary.
Titanic had 16 sets of davits, each able to handle four lifeboats. This gave Titanic the ability to carry up to 64 wooden lifeboats^[63] which would have been enough for 4,000 people—considerably more than her actual capacity. However, the White Star Line decided that only 16 wooden lifeboats and four collapsibles would be carried, which could accommodate 1,178 people, only one-third of Titanic's total capacity. At the time, the Board of Trade's regulations required British vessels over 10,000 tons to only carry 16 lifeboats with a capacity of 990 occupants.^[61]
Therefore, the White Star Line actually provided more lifeboat accommodation than was legally required.^[64][f] At the time, lifeboats were intended to ferry survivors from a sinking ship to a rescuing ship—not keep afloat the whole population or power them to shore. Had the SS Californian responded to Titanic's distress calls, the lifeboats may have been adequate to ferry the passengers to safety as planned.^[66]

Technology

Watertight compartments and funnels

The interiors of the Olympic-class ships were subdivided into 16 primary compartments divided by 15 bulkheads which extended well above the waterline. Eleven vertically closing watertight doors could seal off the compartments in the event of an emergency.^[40] The ship's exposed decking was made of pine and teak, while interior ceilings were covered in painted granulated cork to combat condensation.^[41] Standing above the decks were four funnels, each painted buff with black tops, (though only three were functional—the last one was a dummy, installed for aesthetic purposes and also for kitchen ventilation)—and two masts, each 155 feet (47 m) high, which supported derricks for working cargo.

Rudder and steering engines

Titanic's rudder was so large—at 78 feet 8 inches (23.98 m) high and 15 feet 3 inches (4.65 m) long, weighing over 100 tons—that it required steering engines to move it. Two steam-powered steering engines were installed though only one was used at any one time, with the other one kept in reserve. They were connected to the short tiller through stiff springs, to isolate the steering engines from any shocks in heavy seas or during fast changes of direction.^[42] As a last resort, the tiller could be moved by ropes connected to two steam capstans.^[43] The capstans were also used to raise and lower the ship's five anchors (one port, one starboard, one in the centreline and two kedging anchors).^[43]

Water, ventilation and heating

The ship was equipped with her own waterworks, capable of heating and pumping water to all parts of the vessel via a complex network of pipes and valves. The main water supply was taken aboard while Titanic was in port, but in an emergency the ship could also distil fresh water from seawater, though this was not a straightforward process as the distillation plant quickly became clogged by salt deposits. A network of insulated ducts conveyed warm air, driven by electric fans, around the ship, and First Class cabins were fitted with additional electric heaters.^[37]

Radio communications

Marconi company receiving equipment for a 5 kilowatt ocean liner station.

Titanic's radiotelegraph equipment (then known as wireless telegraphy) was leased to the White Star Line by the Marconi International Marine Communication Company, which also supplied two of its employees, Jack Phillips and Harold Bride, as operators. The service maintained a 24-hour schedule, primarily sending and receiving passenger telegrams, but also handling navigation messages including weather reports and ice warnings.^[44][45]
The radio room was located on the Boat Deck, in the officers' quarters. A soundproofed "Silent Room", next to the operating room, housed loud equipment, including the transmitter and a motor-generator used for producing alternating currents. The operators' living quarters were adjacent to the working office. The ship was equipped with a 'state of the art' 5 kilowatt rotary spark-gap transmitter, operating under the radio callsign MGY, and communication was conducted in Morse code. This transmitter was one of the first Marconi installations to use a rotary spark gap, which gave Titanic a distinctive musical tone that could be readily distinguished from other signals. The transmitter was one of the most powerful in the world, and guaranteed to broadcast over a radius of 350 miles (563 km). An elevated T-antenna that spanned the length of the ship was used for transmitting and receiving. The normal operating frequency was 500 kHz (600 m wavelength), however the equipment could also operate on the "short" wavelength of 1000 kHz (300 m wavelength) that was employed by smaller vessels with shorter antennas.^[46]

Passenger facilities

Further information: First class facilities of the RMS Titanic and Second and Third-Class Facilities on the RMS Titanic

The passenger facilities aboard Titanic aimed to meet the highest standards of luxury. According to Titanic's general arrangement plans, the ship could accommodate 833 First Class Passengers, 614 in Second Class and 1,006 in Third Class, for a total passenger capacity of 2,453. In addition, her capacity for crew members exceeded 900, as most documents of her original configuration have stated that her full carrying capacity for both passengers and crew was approximately 3,547. Her interior design was a departure from that of other passenger liners, which had typically been decorated in the rather heavy style of a manor house or an English country house.^[47]
Titanic was laid out in a much lighter style similar to that of contemporary high-class hotels—the Ritz Hotel was a reference point—with First Class cabins finished in the Empire style.^[47] A variety of other decorative styles, ranging from the Renaissance to Louis XV, were used to decorate cabins and public rooms in First and Second Class areas of the ship. The aim was to convey an impression that the passengers were in a floating hotel rather than a ship; as one passenger recalled, on entering the ship's interior a passenger would "at once lose the feeling that we are on board ship, and seem instead to be entering the hall of some great house on shore".^[48]

First-Class passengers had at their disposal an on-board telephone system, darkroom for developing photographs, a lending library and a small barber shop. Among the more novel features was a 7 ft. deep swimming pool, a gymnasium, a squash court, and a Turkish bath which comprised Electric Bath, steam room, cool room, massage room, and hot room.^[48] First Class common rooms were impressive in scope and lavishly decorated. They included a Lounge in the style of the Palace of Versailles, an enormous Reception Room, a men's Smoking Room, and a Reading and Writing Room. There was an À la Carte Restaurant in the style of the Ritz Hotel which was run as a concession by the famous Italian restaurateur Gaspare Gatti.^[49] A Café Parisien decorated in the style of a French sidewalk café, complete with ivy covered trellises and wicker furniture, was run as an annex to the restaurant. For an extra cost, First-Class passengers could enjoy the finest French haute cuisine in the most luxurious of surroundings.^[50] There was also a Verandah Café where tea and light refreshments were served, that offered grand views of the ocean. At 114 ft. long X 92 ft. wide, the Dining Saloon on D-Deck was the largest room afloat and could seat almost 600 passengers at a time.^[51]

Verandah & Palm Court on RMS Olympic, Titanic's sister ship

The A La Carte restaurant on B Deck, run as a concession by Italian-born chef Gaspare Gatti

1st-Class Lounge on the RMS Olympic

Third Class (also commonly referred to as Steerage) accommodations aboard Titanic were not as luxurious as First Class, but even so were better than on many other ships of the time. They reflected the improved standards which the White Star Line had adopted for trans-Atlantic immigrant and lower-class travel. On most other North Atlantic passenger ships at the time, Third Class accommodations consisted of little more than open dormitories in the forward end of the vessels, in which hundreds of people were confined, often without adequate food or toilet facilities.
The White Star Line had long since broken that mould. As seen aboard Titanic, all White Star Line passenger ships divided their Third Class accommodations into two sections, always at opposite ends of the vessel from one another. The established arrangement was that single men were quartered in the forward areas, while single women, married couples and families were quartered aft. In addition, while other ships provided only open berth sleeping arrangements, White Star Line vessels provided their Third Class passengers with private, small but comfortable cabins capable of accommodating two, four, six, eight and 10 passengers.
Third Class accommodations also included their own dining rooms, as well as public gathering areas including adequate open deck space, which aboard Titanic comprised the Poop Deck at the stern, the forward and aft well decks, and a large open space on D Deck which could be used as a social hall. This was supplemented by the addition of a smoking room for men and a General Room on C Deck which women could use for reading and writing. Although they were not as glamorous in design as spaces seen in upper class accommodations, they were still far above average for the period.
Leisure facilities were provided for all three classes to pass the time. As well as making use of the indoor amenities such as the library, smoking rooms, and gymnasium, it was also customary for passengers to socialise on the open deck, promenading or relaxing in hired deck chairs or wooden benches. A passenger list was published before the sailing to inform the public which members of the great and good were on board, and it was not uncommon for ambitious mothers to use the list to identify rich bachelors to whom they could introduce their marriageable daughters during the voyage.^[52]
One of Titanic's most distinctive features was her First Class staircase, known as the Grand Staircase or Grand Stairway. Built of solid English oak with a sweeping curve, the staircase descended through seven decks of the ship, between the Boat Deck to E deck, before terminating in a simplified single flight on F Deck.^[53] It was capped with a dome of wrought iron and glass that admitted natural light to the stairwell. Each landing off the staircase gave access to ornate entrance halls paneled in the William & Mary style and lit by ormolu and crystal light fixtures.^[54]
At the uppermost landing was a large carved wooden panel containing a clock, with figures of "Honour and Glory Crowning Time" flanking the clock face.^[53] The Grand Staircase was destroyed during the sinking and is now just a void in the ship which modern explorers have used to access the lower decks.^[55] During the filming of James Cameron's Titanic in 1997, his replica of the Grand Staircase was ripped from its foundations by the force of the inrushing water on the set. It has been suggested that during the real event, the entire Grand Staircase was ejected upwards through the dome.^[56]

The gymnasium on the Boat Deck, which was equipped with the latest exercise machines

The famous Grand Staircase, which connected Boat Deck and E Deck

Swimming Pool on the Titanic]]

Mail and cargo

Features

Power

Rudder with central and port wing propellers^[c] for scale note the man at bottom of the photo

Titanic was equipped with three main engines—two reciprocating four-cylinder, triple-expansion steam engines and one centrally placed low-pressure Parsons turbine—each driving a propeller. The two reciprocating engines had a combined output of 30,000 hp and a further 16,000 hp was contributed by the turbine.^[16] The White Star Line had used the same combination of engines on an earlier liner, the SS Laurentic, where it had been a great success.^[27] It provided a good combination of performance and speed; reciprocating engines by themselves were not powerful enough to propel an Olympic-class liner at the desired speeds, while turbines were sufficiently powerful but caused uncomfortable vibrations, a problem that affected the all-turbine Cunard liners Lusitania and Mauretania.^[28] By combining reciprocating engines with a turbine, fuel usage could be reduced and motive power increased, while using the same amount of steam.^[29]
The two reciprocating engines were each 63 feet (19 m) long and weighed 720 tons, with their bedplates contributing a further 195 tons.^[28] They were powered by steam produced in 29 boilers, 24 of which were double-ended and five single-ended, which contained a total of 159 furnaces.^[30] The boilers were 15 feet 9 inches (4.80 m) in diameter and 20 feet (6.1 m) long, each weighing 91.5 tons and capable of holding 48.5 tons of water.^[31]
They were heated by burning coal, 6,611 tons of which could be carried in Titanic's bunkers, with a further 1,092 tons in Hold 3. The furnaces required over 600 tons of coal a day to be shovelled into them by hand, requiring the services of 176 firemen working around the clock.^[32] 100 tons of ash a day had to be disposed of by ejecting it into the sea.^[33] The work was relentless, dirty and dangerous, and although firemen were paid relatively generously^[32] there was a high suicide rate among those who worked in that capacity.^[34]
Exhaust steam leaving the reciprocating engines was fed into the turbine, which was situated aft. From there it passed into a surface condenser, to increase the efficiency of the turbine and so that the steam could be condensed back into water and reused.^[35] The engines were attached directly to long shafts which drove the propellers. There were three, one for each engine; the outer (or wing) propellers were the largest, each carrying three blades of manganese-bronze alloy with a total diameter of 23.5 feet (7.2 m).^[31] The middle propeller was slightly smaller at 17 feet (5.2 m) in diameter,^[36] and could be stopped but not reversed.
Titanic's electrical plant was capable of producing more power than an average city power station of the time.^[37] Immediately aft of the turbine engine were four 400 kW steam-driven electric generators, used to provide electrical power to the ship, plus two 30 kW auxiliary generators for emergency use.^[38] Their location in the stern of the ship meant they remained operational until the last few minutes before the ship sank.^[39]

Dimensions and layout

Titanic was 882 feet 9 inches (269.06 m) long with a maximum breadth of 92 feet 6 inches (28.19 m). Her total height, measured from the base of the keel to the top of the bridge, was 104 feet (32 m).^[16] She measured 46,328 gross register tons and with a draught of 34 feet 7 inches (10.54 m), she displaced 52,310 tons.^[17]
All three of the Olympic-class ships had ten decks (excluding the top of the officers' quarters), eight of which were for passenger use. From top to bottom, the decks were:

• The Boat Deck, on which the lifeboats were housed. It was from here during the early hours of 15 April 1912 that Titanic's lifeboats were lowered into the North Atlantic. The bridge and wheelhouse were at the forward end, in front of the captain's and officers' quarters. The bridge stood 8 feet (2.4 m) above the deck, extending out to either side so that the ship could be controlled while docking. The wheelhouse stood directly behind and above the bridge. The entrance to the First Class Grand Staircase and gymnasium were located midships along with the raised roof of the First Class lounge, while at the rear of the deck were the roof of the First Class smoke room and the relatively modest Second Class entrance. The wood-covered deck was divided into four segregated promenades: for officers, First Class passengers, engineers, and Second Class passengers respectively. Lifeboats lined the side of the deck except in the First Class area, where there was a gap so that the view would not be spoiled.^[18][19]
• A Deck, also called the Promenade Deck, extended along the entire 546 feet (166 m) length of the superstructure. It was reserved exclusively for First Class passengers and contained First Class cabins, the First Class lounge, smoke room, reading and writing rooms and Palm Court.^[18]
• B Deck, the Bridge Deck, was the top weight-bearing deck and the uppermost level of the hull. More First Class passenger accommodation was located here with six palatial staterooms (cabins) featuring their own private promenades. On Titanic, the A La Carte Restaurant and the Café Parisien provided luxury dining facilities to First Class passengers. Both were run by subcontracted chefs and their staff; all were lost in the disaster. The Second Class smoking room and entrance hall were both located on this deck. The raised forecastle of the ship was forward of the Bridge Deck, accommodating Number 1 hatch (the main hatch through to the cargo holds), numerous pieces of machinery and the anchor housings.^[b] Aft of the Bridge Deck was the raised Poop Deck, 106 feet (32 m) long, used as a promenade by Third Class passengers. It was where many of Titanic's passengers and crew made their last stand as the ship sank. The forecastle and Poop Deck were separated from the Bridge Deck by well decks.^[20][21]
• C Deck, the Shelter Deck, was the highest deck to run uninterrupted from stem to stern. It included both well decks; the aft one served as part of the Third Class promenade. Crew cabins were housed below the forecastle and Third Class public rooms were housed below the Poop Deck. In between were the majority of First Class cabins and the Second Class library.^[20][22]
• D Deck, the Saloon Deck, was dominated by three large public rooms—the First Class Reception Room, the First Class Dining Saloon and the Second Class Dining Saloon. An open space was provided for Third Class passengers. First, Second and Third Class passengers had cabins on this deck, with berths for firemen located in the bow. It was the highest level reached by the ship's watertight bulkheads (though only by eight of the fifteen bulkheads).^[20][23]
• E Deck, the Upper Deck, was predominantly used for passenger accommodation for all three classes plus berths for cooks, seamen, stewards and trimmers. Along its length ran a long passageway nicknamed Scotland Road, in reference to a famous street in Liverpool. Scotland Road was used by Third Class passengers and crew members.^[20][24]
• F Deck, the Middle Deck, was the last complete deck and mainly accommodated Second and Third Class passengers and several departments of the crew. The Third Class dining saloon was located here, as were the swimming pool and Turkish bath.^[20][24]
• G Deck, the Lower Deck, was the lowest complete deck that carried passengers, and had the lowest portholes, just above the waterline. The squash court was located here along with the travelling post office where letters and parcels were sorted ready for delivery when the ship docked. Food was also stored here. The deck was interrupted at several points by orlop (partial) decks over the boiler, engine and turbine rooms.^[20][25]
• The Orlop Decks and the Tank Top below that were on the lowest level of the ship, below the waterline. The orlop decks were used as cargo spaces, while the Tank Top—the inner bottom of the ship's hull—provided the platform on which the ship's boilers, engines, turbines and electrical generators were housed. This area of the ship was occupied by the engine and boiler rooms, areas which passengers would have been prohibited from seeing. They were connected with higher levels of the ship by flights of stairs; twin spiral stairways near the bow provided access up to D Deck.^[20][25]

Background

The name Titanic was derived from Greek mythology and meant gigantic. Built in Belfast, Ireland, in the United Kingdom of Great Britain and Ireland (as it was then known), the RMS Titanic was the second of the three Olympic-class ocean liners—the first was the RMS Olympic and the third was the HMHS Britannic.^[5] They were by far the largest vessels of the British shipping company White Star Line's fleet, which comprised 29 steamers and tenders in 1912.^[6] The three ships had their genesis in a discussion in mid-1907 between the White Star Line's chairman, J. Bruce Ismay, and the American financier J. P. Morgan, who controlled the White Star Line's parent corporation, the International Mercantile Marine Co. (IMM).
The White Star Line faced an increasing challenge from its main rivals Cunard, which had recently launched the Lusitania and the Mauretania—the fastest passenger ships then in service—and the German lines Hamburg America and Norddeutscher Lloyd. Ismay preferred to compete on size rather than speed and proposed to commission a new class of liners that would be larger than anything that had gone before as well as being the last word in comfort and luxury.^[7] The company sought an upgrade in their fleet primarily in response to the Cunard giants but also to replace their oldest pair of passenger ships still in service, being the SS Teutonic of 1889 and SS Majestic of 1890. Teutonic was replaced by Olympic while Majestic was replaced by Titanic. Majestic would be brought back into her old spot on White Star's New York service after Titanic's loss.^[8]
The ships were constructed by the Belfast shipbuilders Harland and Wolff, who had a long-established relationship with the White Star Line dating back to 1867.^[9] Harland and Wolff were given a great deal of latitude in designing ships for the White Star Line; the usual approach was for the latter to sketch out a general concept which the former would take away and turn into a ship design. Cost considerations were relatively low on the agenda and Harland and Wolff was authorised to spend what it needed on the ships, plus a five percent profit margin.^[9] In the case of the Olympic-class ships, a cost of £3 million (£250 million in 2015 money) for the first two ships was agreed plus "extras to contract" and the usual five percent fee.^[10]
Harland and Wolff put their leading designers to work designing the Olympic-class vessels. The design was overseen by Lord Pirrie, a director of both Harland and Wolff and the White Star Line; naval architect Thomas Andrews, the managing director of Harland and Wolff's design department; Edward Wilding, Andrews' deputy and responsible for calculating the ship's design, stability and trim; and Alexander Carlisle, the shipyard's chief draughtsman and general manager.^[11] Carlisle's responsibilities included the decorations, equipment and all general arrangements, including the implementation of an efficient lifeboat davit design.^[a]
On 29 July 1908, Harland and Wolff presented the drawings to J. Bruce Ismay and other White Star Line executives. Ismay approved the design and signed three "letters of agreement" two days later, authorising the start of construction.^[14] At this point the first ship—which was later to become Olympic—had no name, but was referred to simply as "Number 400", as it was Harland and Wolff's four hundredth hull. Titanic was based on a revised version of the same design and was given the number 401.^[15]

RMS Titanic

From Wikipedia, the free encyclopedia

"Titanic" redirects here. For the film by James Cameron, see Titanic (1997 film). For other uses, see Titanic (disambiguation).

A colourised photo of the RMS Titanic departing Southampton on 10 April 1912
History
United Kingdom
Name:	RMS Titanic
Owner:	White Star Line
Port of registry:	Liverpool, UK
Route:	Southampton to New York City
Ordered:	17 September 1908
Builder:	Harland and Wolff, Belfast
Cost:	7.5 million (US dollars)
Yard number:	401
Laid down:	31 March 1909
Launched:	31 May 1911
Completed:	2 April 1912
Maiden voyage:	10 April 1912
In service:	10–15 April 1912
Identification:	Radio call sign "MGY"
Fate:	Hit an iceberg 11:40 p.m. (ship's time) 14 April 1912 on her maiden voyage and sank 2 h 40 min later
Status:	Wreck
General characteristics
Class and type:	Olympic-class ocean liner
Tonnage:	46,328 GRT
Displacement:	52,310 tons
Length:	882 ft 9 in (269.1 m)
Beam:	92 ft 6 in (28.2 m)
Height:	175 ft (53.3 m) (keel to top of funnels)
Draught:	34 ft 7 in (10.5 m)
Depth:	64 ft 6 in (19.7 m)
Decks:	9 (A–G)
Installed power:	24 double-ended and five single-ended boilers feeding two reciprocating steam engines for the wing propellers, and a low-pressure turbine for the centre propeller;[1] output: 46,000 HP
Propulsion:	Two three-blade wing propellers and one four-blade centre propeller
Speed:	Cruising: 21 kn (39 km/h; 24 mph). Max: 24 kn (44 km/h; 28 mph)
Capacity:	Passengers: 2,435, crew: 892. Total: 3,327 (or 3,547 according to other sources)
Notes:	Lifeboats: 20 (sufficient for 1,178 people)

RMS Titanic (/taɪˈtænɪk/) was a British passenger liner that sank in the North Atlantic Ocean in the early morning of 15 April 1912, after colliding with an iceberg during her maiden voyage from Southampton to New York City. Of the 2,224 passengers and crew aboard, more than 1,500 died, making it one of the deadliest commercial peacetime maritime disasters in modern history. The largest ship afloat at the time it entered service, the RMS Titanic was the second of three Olympic class ocean liners operated by the White Star Line, and was built by the Harland and Wolff shipyard in Belfast. Thomas Andrews, her architect, died in the disaster.
Under the command of Edward Smith, who went down with the ship, Titanic carried some of the wealthiest people in the world, as well as hundreds of emigrants from Great Britain and Ireland, Scandinavia and elsewhere throughout Europe seeking a new life in North America. The first class accommodation was designed to be the pinnacle of comfort and luxury, with an on-board gymnasium, swimming pool, libraries, high-class restaurants and opulent cabins. A high-power radiotelegraph transmitter was available for sending passenger "marconigrams" and for the ship's operational use. Although Titanic had advanced safety features such as watertight compartments and remotely activated watertight doors, there were not enough lifeboats to accommodate all of those aboard due to outdated maritime safety regulations. Titanic only carried enough lifeboats for 1,178 people—slightly more than half of the number on board, and one third of her total capacity.
After leaving Southampton on 10 April 1912, Titanic called at Cherbourg in France and Queenstown (now Cobh) in Ireland before heading west to New York.^[2] On 14 April, four days into the crossing and about 375 miles (600 km) south of Newfoundland, she hit an iceberg at 11:40 p.m. ship's time. The collision caused the ship's hull plates to buckle inwards along her starboard (right) side and opened five of her sixteen watertight compartments to the sea; she could only survive four flooding. Meanwhile, passengers and some crew members were evacuated in lifeboats, many of which were launched only partially loaded. A disproportionate number of men were left aboard because of a "women and children first" protocol for loading lifeboats.^[3] At 2:20 a.m., she broke apart and foundered—with well over one thousand people still aboard. Just under two hours after Titanic sank, the Cunard liner RMS Carpathia arrived at the scene, where she brought aboard an estimated 705 survivors.
The disaster was greeted with worldwide shock and outrage at the huge loss of life and the regulatory and operational failures that had led to it. Public inquiries in Britain and the United States led to major improvements in maritime safety. One of their most important legacies was the establishment in 1914 of the International Convention for the Safety of Life at Sea (SOLAS), which still governs maritime safety today. Additionally, several new wireless regulations were passed around the world in an effort to learn from the many missteps in wireless communications—which could have saved many more passengers.^[4]
The wreck of Titanic, first discovered over 70 years after the sinking, remains on the seabed, split in two and gradually disintegrating at a depth of 12,415 feet (3,784 m). Since her discovery in 1985, thousands of artifacts have been recovered and put on display at museums around the world. Titanic has become one of the most famous ships in history; her memory is kept alive by numerous works of popular culture, including books, folk songs, films, exhibits, and memorials. Titanic is the second largest ocean liner wreck in the world, only beaten by her sister HMHS Britannic, the largest ever sunk.